Forum Post: RE: Open Rail Designer Vertical Profile
Well, nothing to do with what you were used in Rail Track 1- Open profile view 2- create named boundary/boundaries from Drawing Production. Use Profile Named Boundaries. You've got seed file with frame...
View ArticleForum Post: RE: Open Rail Designer Vertical Profile
It's worth noting there are some useful tutorials on YouTube as well... https://www.youtube.com/watch?v=4kXm_SViy50...
View ArticleForum Post: ORD dynamic cross section - no components
When I create a dynamic cross-section in ORD there are no components displayed. I can turn on the cut and fill graphics and null points, these display correctly but cannot seem to get the components to...
View ArticleForum Post: RE: Cannot Open DGN on different versions of OpenRail Designer
Thank you for the response Jpln, the backward compatibility issue will be problematic if every upcoming updates is not compatible to previous versions.
View ArticleForum Post: ORD - terrain - max triangle length and 3D display
I have two questions about terrain model in ORD: 1) How can I set a max triangle length in existing terrain? 2) In 3D view - I want to see only triangle edges in existing terrain (without green fill...
View ArticleForum Post: RE: Cannot Open DGN on different versions of OpenRail Designer
@jpln will this continue with the newer release of the products? So when a new version of ORLD comes out later this year, will the current version no longer be able to work with filese created in the...
View ArticleForum Post: How about release announcements?
I would appreciate an explanation of why there is no evidence anywhere on the Connection center or the forums about Software releases or resolved issues. Releases just "appear" in the software...
View ArticleForum Post: Secondary routes - Railtrack
Hello, do you use someone's secondary routes? I plan the platform and I need the components to draw always perpendicular to the adjacent track. I have set up secondary routes, see the picture. At the...
View ArticleForum Post: RE: Secondary routes - Railtrack
That is the way it does work. Templates are created perpendicular to the reference until points are beyond the secondary alignment, then construction is done perpendicular to the secondary alignment....
View ArticleForum Post: RE: ORD dynamic cross section - no components
Is everything good in the 3D model ? Do you see all components ?
View ArticleForum Post: RE: Cannot Open DGN on different versions of OpenRail Designer
Well, I would say that I don't know any complete software that doesn't need any update. Of course you can keep "old" software as long as the newer doesn't bring enough additional value. We have been...
View ArticleForum Post: RE: ORD dynamic cross section - no components
No, I have tried to use the dynamic cross-section tool in multiple files now and it has not worked in either of them.
View ArticleForum Post: BRT - View Cardinal Stationing without the chainage
HI, Using BRT and wanted to display the cardinal framepoint but without the actual stationing chainage. I only wanted to display the "S". Please see picture. Is there a way to do this? TIA
View ArticleForum Post: SIG Virtual Workshop: OpenRail - October 24, 2018 - You're...
Due to scheduling conflicts, the OpenRail Special Interest Group virtual workshop for October has been cancelled. The OpenRail SIG will next meet on November 28, 2018. The registration page should be...
View ArticleForum Post: RE: BRT - View Cardinal Stationing without the chainage
Uncheck the station in the view stationing command and add the "S" to the cell used to annotate the cardinal points.
View ArticleForum Post: RE: ORD dynamic cross section - no components
dynamic cross section is a section of the 3D model. That is why you must check that the 3D model is OK and that you can see all components in the 3D model (or any other 3D element).
View ArticleForum Post: RE: ORD - terrain - max triangle length and 3D display
1- this is a property of the terrain model. Instead of using slivers you can use max triangle length and set the length. 2- if you set the view display style as wireframe you should not get the fill...
View ArticleForum Post: RE: ORD - terrain - max triangle length and 3D display
1 - There is an option in terrain model (edge method) but it didn't work with terrain created from file (dtm). But now everything is working correctly - it turned out that I didn't import features (I...
View ArticleForum Post: RE: ORD - terrain - max triangle length and 3D display
if you import the terrain model from a dtm you may have the edge method locked to "from boundary". If it is the case and you want to change, you can remove the boundary. There is a command in the...
View ArticleForum Post: RE: ORD dynamic cross section - no components
Yes, 3D model is OK. Sometimes when I create the dynamic section the initial cross-section works but as soon as I move the section location all the components disappear.
View Article