Forum Post: SIG Workshop: OpenRail – Nov. 28, 2018 – You're Invited!
Mark your calendar and invite your colleagues to the next OpenRail Special Interest Group virtual workshop on Wednesday, November 28. The hot topic on this month’s agenda is Using Point Cloud Data in...
View ArticleForum Post: RE: Importing Survey from CAD graphics
You can directly create the existing center line from rails without to convert cad lines to alignment. Just use "convert rails to center line". It will create the "regression line" you will be able to...
View ArticleForum Post: RE: Importing Survey from CAD graphics
I still don't understand why you can't select the existing rails in CAD and then import the horizontal and vertical data, for instance when designing the track we need the Left hand and Right hand...
View ArticleForum Post: RE: Increase width in Template creation
Hi JPLN, For the above I have found in the point control option where I selected > mode = vertical > control type = cant, and given rail points. again is it required to select "Both" mode to...
View ArticleForum Post: Open Rail Designer -some Questions
Hello Community, we are a class in Germany and we want to create a tunnel and first we want to make a route in Open Rail designer. The route is determined by the engineers. Is it possible to import a...
View ArticleForum Post: RE: Open Rail Designer -some Questions
yes you can: create a design file using 2D seed file do something to get the 3D model reference the DWG in the 3D model do something to get the polyline in the current 3D model (copy, create complex,...
View ArticleForum Post: RE: Increase width in Template creation
No the cant control is vertical only. The cant control requires 3 points: left Rail - Cant center - Right Rail (must be tagged as "superelevation" in the template). Cant Center must be constrained to...
View ArticleForum Post: RE: Importing Survey from CAD graphics
You can import the rails as well. Copy the 3D rail lines in the current 3D model and use "Create plan from 3D". You will get the plan line and associated profile.
View ArticleForum Post: ORD - Shunt limits
Hi guys, Is there any possibility to create shunt limits for turnouts and displaying the shunt point in the design file? Thx,, WS
View ArticleForum Post: RE: ORD - Shunt limits
Yes in Rail Track SS4 (geometry>Turnouts>create Shunts), not yet in OpenRail Designer. However, you can define the shunt limits by offsets from alignment. With OpenRail Designer keeping the links...
View ArticleForum Post: RE: Open Rail version 10.05.00.30 - multiple regression and view...
When importing points, you can set the feature definition. If you use "Regression Point" feature definition, then it has the "slew Point" annotation group defined.
View ArticleForum Post: RE: Open Rail version 10.05.00.30 - multiple regression and view...
Thanks a lot for advice will try Regards Tomasz Kupiev
View ArticleForum Post: RE: Open Rail version 10.05.00.30 - multiple regression and view...
How does this work when you are using a regression line? I have created a regression line from the right and left hand rails, and then created a profile from this line using the CL. The feature...
View ArticleForum Post: RE: Open Rail version 10.05.00.30 - multiple regression and view...
You are right and it must be fixed to allow full workflow from rail 3D lines. Not sure if is already fixed for Q4. Actually annotation only works if regression line is created from points. The...
View ArticleForum Post: RE: ORD - Shunt limits
jpln how would this work with civil accudraw? You are defining the position of a point based on offset/offset from two separate alignments, your turnout route and your through route CL
View ArticleForum Post: RE: ORD - Shunt limits
I would rather offset both alignment, then trim (or not) to get the point. You can keep these as Construction class and create a geometry point snapped to the intersection, or the key point of the...
View ArticleForum Post: OpenRail ConceptStation - Import Turnout Library
I'm testing out OpenRail ConceptStation ( 10.00.07.27) and was wondering whether it's possible to import a BRT turnout library (.xml or .txt), or are we limited to the pre-installed ones?
View ArticleForum Post: RE: OpenRail ConceptStation - Import Turnout Library
Paul Have a look at circa 30 seconds in to this video https://communities.bentley.com/products/rail_design/w/rail_design__wiki/39662/turnout-import KeyIn the command RAIL TURNOUT IMPORT and select an...
View Article