Forum Post: Software for checking clashes
I am a track designer. Can you suggest a software to check clashes. after my horizontal and Vertical design is done.
View ArticleForum Post: RE: Multiple Profile with predefined stations
Take care to use Profile View the second time you generate the sheets. If the setting is still "use station limits" then nothing will change.
View ArticleForum Post: RE: My Corridor disappeared
Are you able to share the file and any mandatory reference used by the file ?
View ArticleForum Post: RE: Cant not importing correctly or working properly in OpenRail
you can drop it here: https://bentley.sharefile.com/r-r47335b672cc41caa
View ArticleForum Post: RE: How to see elevation in plan alignment.
You can use alignment tracking tool to get information. If the profile is also displayed and you activate the variable "simultaneous tracking" from variable manager, then you will get tracking on...
View ArticleForum Post: RE: Importing ALG to Open Rail
In Openrail, Create a DGN using 2D seed file then import ALG. if alignment has an active profile then 3D model should be created automatically. If not, open a profile view of your alignment and set...
View ArticleForum Post: Vertical Curve - Parabolic Definition and Equivalent Radius
All I am working on a spreadsheet to check designs. I am essentially looking to input vertical intersection points and curve lengths, after which the speradsheet will then output gradients, gradient...
View ArticleForum Post: RE: Multiple Profile with predefined stations
Thanks, It's working fine now, for datum I am planning to create temporary surface using alignment.
View ArticleForum Post: RE: Software for checking clashes
What do you mean by checking clashes ? 3D clash detection between 3D elements or checking coordination between horizontal and vertical ?
View ArticleForum Post: RE: Software for checking clashes
Yes 3D clash detection. Like when i have made a Geometry i want to run a train model on the track and check if there are clashes anywhere with catenary or some structure.
View ArticleForum Post: RE: Vertical Curve - Parabolic Definition and Equivalent Radius
yes K = l/(g2 - g1). I can check using check integrity that the value is correct and annotation is correct (version 08.11.07.685 and 08.11.09.904) R=61224.4898
View ArticleForum Post: RE: Vertical Curve - Parabolic Definition and Equivalent Radius
Thanks for checking jpln What worries me then is that the definition of the curve in the alignment I am checking is either A) Not set to parabolic B) Is set to parabolic but annotated in Vertical...
View ArticleForum Post: RE: Vertical Curve - Parabolic Definition and Equivalent Radius
if I change parabolic to circular for the existing vertical alignment then radius reported is 61227.947
View ArticleForum Post: RE: Software for checking clashes
Then it is Bentley Navigator. So you must publish an imodel from OpenRail then open it in Bentley Navigator to run a clash detection analysis. It is coming in MicroStation U14, and it should also come...
View ArticleForum Post: OpenRail Designer 10.07.03.18 - Fix available
Please have a look on the following post:...
View ArticleForum Post: RE: Option create cross section in Power Rail Track v8i...
Hi Alastair Old Bean! I have this problem too. I don't see 'Corridor' in my 'Tools' drop down menu. Any ideas? Jamie
View ArticleForum Post: Is there a step by step guide to creating Corridors and then...
I want to create sections at 5m intervals along existing rail survey. No design yet. Do I have to create a corridor for the existing track? Can I not create sections from a surface like I used to? I am...
View ArticleForum Post: hi, kml or kmz files probable import in dgn?
hi kmz or kml files; how is the import in the dgn files?
View ArticleForum Post: RE: Option create cross section in Power Rail Track v8i...
Jamie Must admit am struggling to remember where this lives without BRT in front of me. Can you try scrolling down in the tools menu. Or going to the arrow at the top and going up one level and look...
View ArticleForum Post: LAS point cloud import
On importing the LAS point cloud data on Bentley platform Open Rail or Power Rail Track (Fig:1) i am facing two issues:- Everything converts into one layer and becomes monocolor. The model is inverted...
View Article