Forum Post: RE: Help With Amending A Workflow
Hi, you should be able to do it (I did). Are you sure to work in a configured DGNLIB ? In your screenshot all buttons under tasks (right panel) are greyed out. The first should be available to allow...
View ArticleForum Post: How To Place a Vertical Crossover Between inclined Tracks With...
Hi all I am having trouble placing a vertical crossover between 2 lines both of which are inclined. I have a 2 line railway (an up and a dn).I have used a series of curves and transitions to design the...
View ArticleForum Post: i need example for data import versines
i need example for data import versines
View ArticleForum Post: RE: Surface from txt file
Under C:\Program Files (x86)\Bentley\Bentley Rail Track V8.11\Data\metric\.... is a tunnel section file which describes the format you can use. It came from a laser survey. A workflow is available as...
View ArticleForum Post: Help With Placing a Turnout
Hi all I have placed a tunout between 2 lines. The turnout is a CV 1 in 9.25. I have attached a screen print of the tutnout. My question is where is the toe of the switch? is it on the dumb bells?? Is...
View ArticleForum Post: RE: i need example for data import versines
(Please visit the site to view this file) Here you have an example for versine data GPE
View ArticleForum Post: RE: Help With Placing a Turnout
The dumb bells is the toe (.1), the other is the theorical. The length between the two is defined in the turnout setting. C is the heal (.2) on main line. You can display and anotate all points using...
View ArticleForum Post: Distance Between IP to Nose?
Hi all I have placed a crossover between 2 parallel tracks (1432 gauge, 1970 interval). Both crossover units are standard CV 1 in 9.25. The design distance between the IP and nose should be 0.148m....
View ArticleForum Post: RE: Distance Between IP to Nose?
Hi, Difficult to answer without the geometry and the turnout definition. There are also some few settings that can affect the turnout calculation (Project Options>rail). Regards JPLN
View ArticleForum Post: Minimum Machine Spec
Hello, Does anyone have a machine spec for running BRT ? We have some i5 machines that seem to struggle with big models. Regards, Rich
View ArticleForum Post: RE: Distance Between IP to Nose?
You need to update to the latest version, which is 08.11.07.685 (released August 21, 2014) R. W. Bradshaw
View ArticleForum Post: Error writing file problem
Greetings from Croatia :D I have a problem with saving geometry file after a certain action I did. Let's start from beginning: I have a geometry file which contains a several horizontal/vertical...
View ArticleForum Post: RE: Error writing file problem
Hi Hrvoje, I deleted COGO point form ALG with no problem. Try to check setting : File > Project Default -> Drainage Structures (*.dat). Is there any info in field ? My comment: If you are not...
View ArticleForum Post: RE: Error writing file problem
But did you managed to save it? I checked all of this... I don't have any path defined for drainage structures and I am an administrator. I tried all solutions you suggested and didn't worked. As I...
View ArticleForum Post: RE: Error writing file problem
Hi Hrvoje, yes I save it - no problem... If you can, send me screeshot from your File > Project Default .... next: try use another m_structures.dat - may be original file is damaged. ...or: try to...
View Article