Comment on Rail Design - Wiki
Dear Friends , Please tell anyone I am generating cross - section in BTR . here I did complete my template .ird file , I drafted cross section but I am getting only Existing ground level but not...
View ArticleForum Post: RE: Power Railtrack R=(gl-g1)/L versus Radius
You will need to go to the PowerRail Track explorer, right click on the vertical alignment and change it to Circular Definition. If you are always going to use vertical radius, then you will need to...
View ArticleForum Post: RE: Power Railtrack R=(gl-g1)/L versus Radius
Hi Art, I change the curve defenition to Circular, but it doesn't work?
View ArticleForum Post: RE: Power Railtrack R=(gl-g1)/L versus Radius
To get it to chnage you need to select the vertical alignment you are editting in the Explorer and then change the type to Circular Defination.
View ArticleForum Post: Vertical Geometry
Hi. They have asked me for a rail project to model an alignment I want to do this in SS3 but now I run into the following problem. I want a radius between two elements with a fixed radius and a fixed...
View ArticleForum Post: RE: Vertical Geometry
The best way is to export this to an alg.file and use it inside BRT or PowerRail TRack (SS2) with the Multiple Element Regression Analysis. Here you can set the degrees of freedom for any element you...
View ArticleForum Post: RE: Vertical Geometry
Hmm Bentley Railtrack doesn't work good at the moment.
View ArticleForum Post: RE: Vertical Geometry
? What do you mean by that? At the moment? It runs on Mstn SS3 if you use Build 08.11.07.615 or 616. Gunnar
View ArticleForum Post: Regression slews that update automatically
Hi, Does anyone know how to get the regression (view regression command) slews to update automatically when editing an alignment? I have seen a video with Ted Stephens demonstrating it but in real...
View ArticleForum Post: RE: Regression slews that update automatically
hi, You must activate the option in Geometry View Geometry Options. Check that you've got a "Display regression points" preference named exactly the same than the style assigned to the alignment. Best...
View ArticleForum Post: Importing Cant
This may be another very simple question but it there anyway to import Cant onto an ALG. The reason is we have an existing CL and need to bring in the cant to go with it and then generate the rails....
View ArticleForum Post: RE: Importing Cant
1 Select File New and click the Geometry tab. 2 Set the Type to Cant. 3 Enter the Name 4 In the Description field, enter something if you want 5 Click Apply. 6 Close the dialog. 7 In the explorer,...
View ArticleForum Post: RE: Importing Cant
Rich Yes, this is a very useful method. Be aware that you need some cant defined on each element even if it has the same cant as the previous element (unless this has been fixed). To help with this I...
View ArticleForum Post: RE: Importing Cant
Another way is to use the cant editor that allows you to import ASCII file with 3 columns Station | Speed | Cant There is an XSL sheet that also can be used with cant report and give the required...
View ArticleForum Post: Add cell to cross section update problem
Hello! I want to make a two cell placement on same cross section set, but the command delete the previous placement. Is there a way to overlay with the previous cell placement ? Using Bentley Rail...
View ArticleForum Post: Cross section annotate tick problem
Hello! I have a problem whit the ticks. I wish to have tick only on Offset frame. But the option for the length of the tick is common, and the annotation place a tick on the elevation to....
View ArticleForum Post: RE: Add cell to cross section update problem
Hi, I assume you are using place cell/block command. If you place the cell on the same object, then the previous one is deleted if Rail Track Lock Pencil is ON. You should turn it to "INK" before...
View ArticleForum Post: RE: Add cell to cross section update problem
This solve the problem, thank you!
View ArticleForum Post: View survey point symbol
Hello, We have problem using the command: Survey/View survey data/Write survey data to graphics (Symbols) The problem is that, the survey point is represented as Point Text Symbol (character). Is...
View ArticleForum Post: The best way to annotate clearance in Cross section set?
Witch is the fastest easy way to annotate delta H and delta S (clearances between project and existing alignments) in entire Cross section set?
View Article