Forum Post: RE: Rails in Cross Section in PRT SS4
No the workflow looks good. I don't know what can cause the issue. I did it several times and it worked well.
View ArticleForum Post: Request - Guidance materiel for OpenRail SS4
Hi all, Past 1 Year i have exposure to SS2. Now i tried to moving into SS4. Got struct with many issues. Is there any training material (or) book for guidance (or) Videos with series of steps to...
View ArticleForum Post: Incorrect slope of cut in template
Hi All, I model in Bentley RailTrack V8i (Select Series 2). I have problem with templates which include component with End Condition. This component finds existing terrain (Triangulated model from...
View ArticleForum Post: Geographic Coordinate System - in Bentley
Hi all, How to select Geographic Coordinate at initial stage .. how to link google earth to bentley w.r.t which coordinate system need to chose to avoid errors. Thanks Naveen
View ArticleForum Post: RE: Incorrect slope of cut in template
Check out this post and see if it will solve your problem . communities.bentley.com/.../problem-in-creating-cross-section-in-series2
View ArticleForum Post: RE: Geographic Coordinate System - in Bentley
Go to Tools>Geographic>Select Geographic Coordinate System in order to open the dialog. From there, choose the "From Library" button and select your coordinate system. I have only used the...
View ArticleForum Post: RE: Request - Guidance materiel for OpenRail SS4
If you have installed the Connect Advisor and if you are a connected user, you can use Connect Advisor from within SS4 (also available in SS2) to get information through many sources: learnserver,...
View ArticleForum Post: SIG Virtual Workshop: Bentley Rail - October 25, 2017 - You're...
You are invited to attend the next Bentley Rail Special Interest Group (SIG) virtual workshop on Wednesday, October 25, 2017 at 10 a.m. EDT or 5 p.m. EDT . We will be discussing Taking Your Design to...
View ArticleForum Post: RE: Incorrect slope of cut in template
Hello Jeffrey, thank you for help. But it doesn´t work. I have still inccorect slope of cut. See Picture - purple line is from modeling: Maybe it could be my version of RT - Select series 2 -...
View ArticleForum Post: RE: Incorrect slope of cut in template
This looks like an issue that can be fixed. What do your template drops look like in this area (what is your drop frequency)? Is this location in a transition between templates? Are your template drops...
View ArticleForum Post: RE: distance between COGO point and nearby edge of the rail
It is easy to get clearance between COGO points and features or alignment. If the feature that represents the head of rail doesn't exist then there is no report that will give what you need. So 2...
View ArticleForum Post: RE: distance between COGO point and nearby edge of the rail
Hi jpln, thanks for the reply. How can I edit the XLS file, where is it located? I always look for a distance to the nearby rail. The GOCO may be on the left or right side of the alignment.
View ArticleForum Post: RE: distance between COGO point and nearby edge of the rail
You can use your favorite text editor to edit the files. My files are found at the following location ... C:\Program Files (x86)\BentleyV8i\InRoads Group V8.11\XML Data Yours may be slightly different....
View ArticleForum Post: RE: distance between COGO point and nearby edge of the rail
I found the file. Where to make a correction? constant distance 0.7895
View ArticleForum Post: RE: distance between COGO point and nearby edge of the rail
If you cannot find where the corrections needs to be made, I would suggest the much easier route that jpln suggests above. Add a null point to your templates where you want to have the offset measured...
View ArticleForum Post: RE: distance between COGO point and nearby edge of the rail
I want to get the registry quickly without making the templates.
View ArticleForum Post: RE: distance between COGO point and nearby edge of the rail
You can just create an edge of rail feature by offsetting your center line of track.
View ArticleForum Post: RE: Geographic Coordinate System - in Bentley
Thank Blind but i need to clarification especially in sub-zones (for ex. my sub-zone 43P from google earth, while choosing from library i found 43N & 43S only) which one i suppose to pick. please...
View ArticleForum Post: RE: Geographic Coordinate System - in Bentley
One quick way to check is to apply one in MicroStation draw a shape and export to GoogleEarh using the geographic tools. If you get it on the right place in Google you've got the good GCS
View ArticleForum Post: How to change Annotation orientation in ORD
The default horizontal baseline annotation is parallel to the Station Tics. Is there a way to make it perpendicular to the Station Tics? I did this manually rotated. Is there a way in ORD to do it...
View Article