Forum Post: RE: Creating Cross Sections
Using Rail Track SELECTseries 2 or SELECTseries 4 It is almost the same workflow except that SS4 needs the point to be tagged as "Superelevation" in the template. For both, you must : create a cant...
View ArticleForum Post: RE: Difference between Bentley Rail Track and Power Rail Track
Please find the answer here: https://communities.bentley.com/products/rail_design/f/openrail-forum/94268/mx-rail-power-rail-track-and-bentley-rail-track About Bentley Rail Track, latest version only...
View ArticleForum Post: RE: OpenRail Conceptstation - Bridge located incorrectly on...
I did some test using version 10.00.06.45 and didn't experience any issue
View ArticleForum Post: RE: Guidance & Question On Alignments To Profile
Thanks JPLN much appericated
View ArticleForum Post: RE: Procedure to get Plan & Profile in BRT SS2
I can give a small help in French. (Please visit the site to view this file)
View ArticleForum Post: RE: DEGREE OF CURVE AND DELTA
The degree of the curve is an American convention for defining the curvature. It is the arc angle covering a chord length of 100 ft. See more details here:...
View ArticleForum Post: RE: How to change category of imported alignment from Road to...
Sorry for the late answer. End of Year for many people ! By the way Happy New Year to all our followers. I checked with development team and a defect has been filled to be able to choose the template...
View ArticleForum Post: VIP information in vertical profile annotation
I just want to know is there any option in BRT to annotate profile with vertical curve IP information in a box as shown in attached snapshot.
View ArticleForum Post: RE: VIP information in vertical profile annotation
You can't get exactly such output but you can have a look for the best setting you can find using Geometry>View Geometry>Vertical Annotation Here I "omit curve data" and annotate "top of grid". I...
View ArticleForum Post: Inconsistency between Existing Elevation from Cogo and Existing CL
All Am experiencing some inconsistencies when showing existing elevations in profile annotation. Workflow is as follows Import survey line strings for RH and LH rail Create Existing CL Alignment from...
View ArticleForum Post: RE: distance between COGO point and nearby edge of the rail
Hi ENG_PNK, I see that this is an old thread, but in case you still are trying to figure out an easy way to create rail outer edges, you may want to try "View Rails" function (Use "Geometry > View...
View ArticleForum Post: RE: Inconsistency between Existing Elevation from Cogo and...
Hi Alastair, If you create a list report of your cogo-points, would they be at exact the same chainage (i.e. rounded at 10 m)? In "Profile Annotation" you can choose to show the vertical slews at an...
View ArticleForum Post: RE: Inconsistency between Existing Elevation from Cogo and...
My cogo points are not recorded at exact chainage points. They are surveyed points approximately every 5m, so they will be at chainage/station 108701.475 for example. My current set up is to do as you...
View ArticleForum Post: RE: Inconsistency between Existing Elevation from Cogo and...
I think the issue comes from the report. You do the report based on EH_P2_ROAD which is the existing. But if you annotate the design profile you are based on the design alignment. You should do a...
View ArticleForum Post: RE: Inconsistency between Existing Elevation from Cogo and...
jpln the report is used to verify the existing alignment points. EH_P2_Road is the existing CL of Platform 2 Track from survey. I use the cardinal points of this alignment (linestring at approx 5m...
View ArticleForum Post: RE: Inconsistency between Existing Elevation from Cogo and...
if You annotate at interval on the design profile, the stationing of the design alignment is used and elevation interpolated. But on your report you only use existing. So you don't use the same...
View ArticleForum Post: RE: distance between COGO point and nearby edge of the rail
Hi LiPeng, How to extract data to a text file? Base line Station, Cogo point, Horizontal Offset (dist edge of the rail)
View ArticleForum Post: RE: distance between COGO point and nearby edge of the rail
Use clearance-report (Tools > XML Reports > Clearance..); choose the Horizontal alignment (edge of rail) and the Cogo points and Click on ; In the new window, choose a report-template, f.ex...
View ArticleForum Post: SPACE BETWEEN TWO WORDS WHILE ANNOTATION VERTICAL PROFILE
HELLO ALL, I get space between two words while annotating vertical profile table, i tried may possibilities but if i gave space it took in to next line but it don't look good i feel. ex: DESIGN...
View ArticleForum Post: RE: SPACE BETWEEN TWO WORDS WHILE ANNOTATION VERTICAL PROFILE
Hi Naveen, Go to "Frame" in the bottom of Annotate Profile and see if "Fixed Title" is ticked on. if so, try and tick it off.
View Article