Applies To Product(s): Bentley Rail Track, Power Rail Track Version(s): 08.11.07.651 Environment: Area: Vertical Profile Subarea: Annotation Original Author: Amita Shinde, Product Advantage Group Problem Description : Is it possible to annotate a vertical profile with Gradient as a percentage AND a 1 in X value at the same time ? Solution : Yes, it is possible to annotate the vertical profile with gradient as a percentage and 1:X value at the same time. Following are the steps for same: 1. Go to 'Tools Locks Toolbar'. The 'Locks' tool bar is displayed. Change the mode to 'Pen' and click the 'Delete Ink' button to check mark it. 2. Now, go to 'Geometry View Geometry Vertical Annotation'. The 'View Vertical Annotation' dialog box is displayed. Select the tab 'Tangents'. Change the 'Grade' format to say 50% to get the grade in percentage. Hit Apply. 3. Now, from the 'Locks' toolbar change the mode to 'Pencil', uncheck the option 'Delete Ink'. 4. Now, from the 'View Vertical Annotation' dialog box change the grade format to say 1:2.0 to get the grade in 1:X and change the 'Position' to say 3. Hit Apply. The vertical profile should be annotated with both the values.
↧