Forum Post: RE: Unable to save IRD files
So when you do file save as from Roadway designer and save for example in c:/temp folder, it doesn't work ?
View ArticleWiki Page: Paramétrage
[[Chemins relatifs dans un fichier projet RWK]] [[Controle de l'integrite - Tolerances|Contrôle de l'intégrité - Tolérances]] [[Facteur d'echelle|Facteur d'échelle]] [[Gestion des styles et...
View ArticleWiki Page: Fond blanc pour le Roadway Designer
Pour obtenir un fond blanc plutôt que noir dans les fenêtres du Roadway Designer et d'édition des profils types, il suffit de déclarer la variable système Windows: OPENQV_WHITE_BACKGROUND=1...
View ArticleForum Post: RE: Table To Show Slues @ 5m intervals
thanks for the input jpln. I played with the software and found that if i created a profile and then annoated the profile, i was able to include my slues at 5m intervals and delete the vertical...
View ArticleForum Post: Printing To Scale
Hi all Hoping someone could help with a printing problem. I have been given a .dgn file which contains a layout of a sheet of paper with the dimensions of H = 574mm, W=686mm. What I would like to do...
View ArticleForum Post: RE: Unable to save IRD files
Yes. http://prntscr.com/4jwgdc Even when I open an old IRD file, that previously worked without problem, and I try to save it, an error message pops up and the IRD file becomes corrupt. The size...
View ArticleForum Post: RE: Unable to save IRD files
Did you try to repair the installation ? Did you try to open Rail Track, set Project defaults to none, open a local XIN file, just create an alignment in Default then open Roadway Designer and save...
View ArticleForum Post: How Does BRT Calculate The Center Line of Track
Hi all I was hoping someone could shed some light on how BRT creates the centre line of the track. Given a set of surveyed points, when you create the center line of the track how are the co-ordinates...
View ArticleForum Post: RE: Unable to save IRD files
jpln Did you try to repair the installation ? No. jpln Did you try to open Rail Track, set Project defaults to none, open a local XIN file, just create an alignment in Default then open Roadway...
View ArticleForum Post: RE: Unable to save IRD files
So the issue is linked to the path or the IRD itself. Should go to the support team for investigation. You can try to copy and rename the .alg and .ird to the same location where it does work...
View ArticleForum Post: RE: Printing To Scale
Hello, One way to layout an area in a sheet is to rotate/zoom in the design model, to save the view, then from the saved view dialog drag and drop the Saved View on the sheet. Set the scale then...
View ArticleForum Post: RE: Unable to save IRD files
jpln You can try to copy and rename the .alg and .ird to the same location where it does work normally. After opening Rail track as above open the alg, then the IRD. Does it work ? Did not work. I...
View ArticleForum Post: Bridge Modelling
Dear All, I am using Power Rail Track. There is a feature called Bridge which I think it can make a bridge instead of embankment or cutting. How can I model a bridge into my model and how to show it...
View ArticleForum Post: Rounding Error on Lift/Lower
Hi Folks, Whilst carrying out a vertical design, I have come across a rounding error with the 'lift' value that is produced. The value is only 1mm in cases. Is there a way of correcting this or does...
View ArticleForum Post: RE: Rounding Error on Lift/Lower
Did you set something like that in View Regression points ? It works fine for me.
View ArticleForum Post: RE: Rounding Error on Lift/Lower
No, I have my precision set to 0. I think the rounding error will have to stay.
View ArticleWiki Page: Vertical Profile Annotation
Applies To Product(s): Bentley Rail Track, Power Rail Track Version(s): 08.11.07.651 Environment: Area: Vertical Profile Subarea: Annotation Original Author: Amita Shinde, Product...
View ArticleForum Post: Lift & Slue XML reports at defined stations rather than...
Hi, Hopefully a simple answer. How do I get lift/slues to be reported for my created stations rather than the regression points. I have tried both Geometry & Station Base but to no avail....
View ArticleForum Post: RE: Bridge Modelling
If you go to the Bentley LearnServer and Search for "Bentley InRoads Bridge" you will find this on-demand 16 hour class: InRoads Bridge This course introduces civil engineering designers to the use...
View ArticleForum Post: RE: Lift & Slue XML reports at defined stations rather than...
From the slew diagram dialog you can use the report button and use the interpolatedslew report. You must set an interval on the slew diagram dialog.
View Article