Forum Post: Re: Template for benching and end conditions.
TY , Paul , document was very much enlightning
View ArticleForum Post: Re: Standards for Railway Vertical Design
Changing your entry and exit grade will yield a different curve length.Yes, as your change the grades, your K will be constant, as long as you use the L given by the formula and the design speed....
View ArticleForum Post: Re: Rail Track Profile
Note that the profile to surface command creates 2 features (TN2194 and TN2195) because the existing surface has a gap due to the alignment crossing an interior feature.
View ArticleForum Post: Re: Rail Track Templates
The tunnel to surface command was made for specific needs to check a surveyed tunnel surface vs. a tunnel template as a flat template. The check was for overcut and under cut of the tunnel surface. If...
View ArticleForum Post: Re: Import Templates from Graphics
Thank You for your good advice it works.Thanks a lotPankaj
View ArticleForum Post: Re: Report
Hi Dear,You are right I don't have the list of type of file. Could you help me in this? I am using Power Rails.Thanks Pankaj
View ArticleForum Post: Bentley Solvsighting Query
Hi,I'm am told of the software named Bentley Solvsighting. Does it exist? since i cannot find it in Bentley site. ThanksThis is my first post. Please direct me if i am not in proper forum.Regards,Ronald
View ArticleClik here to view.
Wiki Page: BRT_France
Ces informations sont fournis comme référence par les consultants Benltey Rail Track de Bentley France.Remarques:Les vidéos peuvent prendre un certains temps à s'afficher après que vous ayez cliqué...
View ArticleForum Post: Re: annotate vertical profile at survey stations (non regular...
many thanks all of you, it worked
View ArticleWiki Page: Contrôle de l'intégrité - Tolérances
Cette commande connue sous le nom "Check Integrity" en anglais présente l'ensemble des éléments d'un axe et fait ressortir les problèmes éventuels entre éléments. Les plus courants sont la non...
View ArticleForum Post: Re: Snap to an intersection point in Bentley Power Rail
Thank you for the quick reply, first i locked the Intersection Snap Lock on Setting then the CTRL+SHIFT and it works well. Thank you
View ArticleClik here to view.
Forum Post: Re: Cannot run RAIL.EXE
i tried but didn't work. "AutoCAD application has stopped working.. Debug or Close Program"
View ArticleForum Post: Re: How to Snap to intersection point in Bentley Power Rail track
Thank you for the quick reply, the CTRL+SHIFT works well. Thank you
View ArticleForum Post: Re: .shp files
Hello,yes BRT is including map as well as PRT. But you don't need to activate MAP. In the latest version running on the SS3 platform (either BRT or PRT), you just have to reference the SHP files. It is...
View ArticleWiki Page: 4-Les méthodes de cintrage
La méthode Suisse (i.e. apparaissant comme Par Défaut dans l'interface) est simplement:Rf = ( Rm x Rb ) / ( Rm +/- Rb )Où;Rf est le rayon résultant du cintrageRm est le rayon de la voie directeRb est...
View ArticleWiki Page: Appareils de voie
Méthodologie pour les appareils de voie[[1-Placement d'un AdV]][[2-raccorder l'AdV a un axe ou un autre AdV|2-Raccorder l'AdV à un axe ou un autre AdV]][[3-Profil en Long dans l'AdV]][[7012|4-Les...
View ArticleForum Post: Re: Importing Elements as a text
Dear Gunnar, it was successful the ASCII import works. I will illustrate below what I have done. First, I just opened a horizontal alignment of another project and then i generated an XML report for...
View ArticleForum Post: Re: Railtrack: vertical change in plan
That does the trick partly. I'd like to be able to place a symbol at the vertical cardinal, not only a leader, but this is better than nothing.And related to this:Is it possible to annotate the...
View Article