Forum Post: RE: Cut/Fill - need vertical offset
Hi JPLN I'm sorry, yes. Strictly for annotating in longitudinal profile. http://prntscr.com/7o97qy Fill height is in first line, second is cut, third is rail level, and the fifth is existing terrain...
View ArticleForum Post: RE: Missing Point Symbols
Christiaan I've check my BPRT 08.11.07.615 is does not have the symbols option, but BPRT 08.11.07.685 does have it. However, I've stopped using BPRT 08.11.07.685 because there are other problems with it.
View ArticleForum Post: RE: Profile Annotation
Gunnar Not sure if you saw my comment above. Any suggestions?
View ArticleForum Post: RE: Missing Point Symbols
The point symbol functionality was added to Geometry > View > Stationing in 08.11.07.685. Have the problems in .685 that you elude to been logged to SUPPORT? Regards, R. W. Bradshaw
View ArticleForum Post: Dropped dimension styles in Cross sections and Profiles (PROL)
This is a Power Rail Overhead Line related question. In the overheadline structure templates I added some dimensions to the structure. These dimensions show in the final sheet model after creating a...
View ArticleForum Post: RE: translate from PowerRailTrack to MX
Hello Gerbert, Did you try in MX Files -> Import -> LandXML Select the landxml you made. In the other screen use Alignments mapping. I tried this and have no problem with horizontal en vertical....
View ArticleForum Post: Area Of Cross Section
I want to calculate the Area of cross section at every 20 m interval. I have already developed the cross section. Area should come in layer wise like blanketing and sub grade, Filing or cutting at...
View ArticleForum Post: RE: Area Of Cross Section
I am not sure to well understand what you would like to achieve. Do you need a report of cross section areas ?
View ArticleForum Post: Importing Genio Workflow
Hello I have cracked this nut before but my aging brain cannot recall how to do it. Does anyone have a workflow on how to import Genio using the Genio translator? The other forums and even tech support...
View ArticleForum Post: RE: Importing Genio Workflow
You need to define a matching table between strings (MX) and features (Rail Track). This is the .ggr file; Something like GC?? = H/V Alignment pair(Please visit the site to view this file) This is an...
View ArticleForum Post: Cross sections_ Ground levels at regular offset intervals
Dear All, As I have dealing with cross sections for X Project. I need cross sections report as follows. At regular intervals I need Ground levels. Can anybody help me out. Thanks for Your help.
View ArticleForum Post: RE: Cross sections_ Ground levels at regular offset intervals
As we have several hundred products, could you provide the name and version of the Bentley product you are using? TIA
View ArticleForum Post: RE: Cross sections_ Ground levels at regular offset intervals
Bentley Rail track Suite...
View ArticleForum Post: RE: Cut/Fill - need vertical offset
ok understood. Unfortunately I don't see any easier way to achieve the result. The difference is measured between surface and vertical set in the general leaf. One thing you can do is to have 2...
View ArticleForum Post: RE: Cross sections_ Ground levels at regular offset intervals
Hi, Roopa. Here is one way to achieve the result: 1:You must create offset of your alignment as graphic (5m,10m) 2. You must drape this lines on the surface: 3. Import them as a surface (my name of the...
View ArticleForum Post: RE: translate from PowerRailTrack to MX
I finally found the time to do some experimenting, using a single horizontal + vertical alignment. The report from RailTrack is this: (vertical curve, one singled out for easy comparison) Element:...
View ArticleForum Post: RE: translate from PowerRailTrack to MX
There is a option in MX to use circular curves in vertical or parabolic curves. I now this because a collegue had the problem that MX always messes up the curves in the vertical alignments. In Rail...
View ArticleForum Post: RE: translate from PowerRailTrack to MX
Hi Ariaan, I double & triple checked that setting. And importing an alignment with circular curves when MX is set to parabolic causes an error message on each vertical curve. Been there, done that ;-)
View ArticleForum Post: RE: translate from PowerRailTrack to MX
I have imported Brabo2_v11.xml in MX 08.11.09.493. I set the vertical geometry to "vertical curve" in the project settings. Evrything looks good. All vertical alignments have good radius looking ni the...
View ArticleForum Post: RE: translate from PowerRailTrack to MX
I'll give that a try after my holiday
View Article